Pearson Engineering displayed their RCV-Pioneer technology demonstrator at DSEI 2023, showcasing their concept for the future of remote and autonomous combat engineering capability in the UK for the first time.
Designed to provide remotely controlled engineering capability to Robotic Combat Vehicles (RCVs), RCV-Pioneer responds to a need to support uncrewed vehicles of the future. Regardless of mission, such vehicles will need to move to places of their Commanders’ choosing and in doing so, defeat the wide range of natural and deliberate obstacles usually encountered on the battlefield.
RCV-Pioneer provides palletised loads of engineering capability as mission packs spanning urban obstacle clearance, minefield breaching, assault gap crossing, protection and route proving, and counter-mobility. Each mission pack is a self-contained, pre-configured frame to which equipment is integrated that has its origins in Pearson Engineering’s tried, tested and proven technology to support mobility, counter-mobility, and survivability.
The Urban Obstacle Clearance Mission Pack was shown at DSEI 2023 including a multi-purpose v-shaped obstacle blade and manipulator arm capable of both robust and precision tasks. A flat load deck will also be featured, highlighting the ability to integrate a wide range of third-party systems such as a MICLIC for minefield breaching, as shown in the United States.
To enhance operational efficiency, RCV-Pioneer uses an innovative self-lifting system to allow RCVs to rapidly manoeuvre underneath mission packs for rapid integration and removal. RCV-Pioneer mounts to the host platform using quick release fastenings, which require no tools to operate, allowing it to be rapidly fitted and removed from the RCV. The system design will allow two soldiers to fit or remove RCV-Pioneer from the RCV in approximately 30 minutes.
An intuitive Operator Control Unit (OCU) with enhanced depth perception capability is provided to enable the remote operation of RCV-Pioneer. The OCU includes a digital twin to enable training and familiarisation in advance of deployment.
RCV-Pioneer has been successfully trialled in the United States at the US Army Manoeuvre Support Sustainment and Protection Integration Experiments (MSSPIX) 2021 and 2022, as well as at the Robotic Combat Vehicle Experiment in Fort Hood in 2023.
[ENDS]
Our battle proven minefield breaching products provide armoured vehicles with the capability to defeat anti-tank mines. Whether intended for deliberate breaching or to support ‘freedom of manoeuvre’ for fighting vehicles, our blast-resistant ploughs give Commanders the option to move unimpeded and in doing so, maintain a battlefield advantage.
Our earth loading capability delivers a powerful digging and carrying ability, enabling armoured vehicles to transport materials, clear obstacles, dig and fill trenches and to assist in construction tasks. Our loaders can be provided with varying degrees of function and therefore complexity to support different mission sets.
Our interrogation capability is rooted in providing additional capability for Counter-IED and Route Proving operations. To supplement physical detection from ground engaging roller systems, our interrogation arm can be used to further understand the nature of threats and to identify where risks may be present outside of the path of the roller.
Our obstacle and earth moving products include general purpose and multi-purpose dozer blades, designed specifically to meet the needs of different mission sets. Our blades are designed to be tough, robust and lightweight, enabling a wide range of obstacle and earth moving activities whilst minimising the impact on the vehicle’s mobility.
Typically used alongside Pearson Engineering’s Route Opening Mine Plough, Surface Clearance Device or Route Proving rollers, our highly configurable obstacle marking systems support battlefield mobility by quickly and reliably marking safe lanes and the edge of hazardous areas.
Our excavation capability is designed to support combat engineer operations such as digging, demolishing, removing obstacles and filling trenches to support Area Access and Area Denial.
Our approach is often described as a ‘Swiss Army Knife’ in that host vehicles can be adapted to take on various combat engineering roles, or to overcome challenges to mobility. Integration of our products with the vehicle is made via a Pearson Engineering Direct Fit Interface or Pearson Engineering Quick Connect. The most suitable integration method depends on the mission requirements and vehicle capabilities. Our engineers will work closely with end-users and vehicle manufacturers to define the most appropriate route to minimise the impact on the vehicle and to maximise operational capability. Decisions are often based on hydraulic and electrical availability as well as the required role of the vehicle. Our integration kits are used to fit products that are designed to enhance armoured vehicle agility, tactical flexibility and adaptability. They are designed to be configurable and to deliver ‘freedom of manoeuvre’ to operations.
Our recovery capability includes a range of dedicated and multi-purpose blades which are primarily designed to support the recovery of other vehicles and for moving of heavy obstacles. A powerful ground-engaging blade sinks into the earth to hold a vehicle static, acting as the force against which the obstacle can be pulled. The same blade can be articulated to provide some obstacle and earth moving capability.
Surface laid mines represent a rising threat as Armed Forces turn their attention to near peer conflict. Our solutions, each designed to support the missions of dedicated combat engineer vehicles or fighting vehicles, provide a comprehensive detect and displace capability to support deliberate clearance or self-extraction in the face of air delivered scatterable mines.
Our highly configurable rollers have saved countless lives, limbs and assets on operations in Iraq and Afghanistan and have succeeded in ensuring ‘freedom of manoeuvre’ for soldiers around the world. Provided as either a full-width ‘route proving’ variant to actively check routes for the presence of Improvised Explosive Devices, or as a track-width ‘self-protection’ variant, our rollers are designed specifically to meet the needs of wide-ranging operational requirements. Our continued Research & Development and our approach to customisation provides confidence to those who use them.
Like all of Pearson Engineering’s products, our assault gap crossing solutions are designed to be modular, to be interchangeable with other mobility and counter-mobility equipment and to support ‘freedom of manoeuvre’ on the battlefield. In a time when units are tasked to ‘march divided and fight united’, independent manoeuvre support is key.
Our range of Mine Clearance platforms and tools provide Armed Forces and other organisations with scalable solutions for mine clearance, explosive ordnance disposal and the defeat of improvised explosive devices. Our platforms and their tools can also be used to create mobility challenges for adversaries. Proven around the world, these mine clearance platforms and their tools are designed specifically to meet the needs of different operational contexts from large area clearance to support logistics and peace keeping operations through to clearance in complex terrain.